Facilities and layout of artificial swimming place in water slide design

In the design of the water park, the facilities and layout of the artificial swimming place must meet certain requirements, as follows:

1. The artificially constructed swimming place shall be equipped with swimming pool and emergency room, changing room, shower room, public toilet, water quality circulation purification and disinfection equipment control room and warehouse. It should be arranged reasonably in the order of changing room, mandatory shower room, foot dip pool and swimming pool, with proper ratio between each other, and meet the requirements of safe and hygienic use.

2. The first-aid room should be set up according to the requirements of GB19079 "Opening Conditions and Technical Requirements of Stadiums," equipped with oxygen bags, ambulance beds, first-aid medicines and equipment. The first-aid equipment should be placed in an obvious location for easy access.

3. The floor of the dressing room should be constructed with materials that are non-slip, water-proof, and easy to clean, and the slope of the ground should meet the requirements of the building code and have drainage facilities. Walls and interior ceilings are coated with waterproof, mildew-proof and non-toxic materials. The locker room should be equipped with closed lockers, shoe racks and other dressing facilities that match the designed reception volume, and set up hand washing and disinfection facilities with flowing water. The locker should be made of smooth, water-proof material and should be set according to the standard of one guest and one use. The locker room has a wide passage to maintain air circulation. The indoor swimming pool that is open all year round should be equipped with air conditioning and ventilation equipment and pool water temperature adjustment facilities.

4. A forced-pass shower should be installed between the shower room and the foot dip sterilization pond. A shower head should be provided for every 20 to 30 people in the shower room. The ground should be constructed with materials that are non-slip, water-proof, and easy to clean. The slope of the ground should meet the requirements of the building code and drainage facilities should be provided. The walls and ceiling are coated with waterproof, mildew-proof and non-toxic materials, and the shower room is equipped with water supply and drainage facilities.

5. To provide customers with drinking utensils, a special disinfection room for drinking utensils should be set up.

6. Swimming pools with different deep and shallow zones should have obvious water depth, warning signs for deep and shallow water areas, or set up deep and shallow water isolation zones with obvious signs in the swimming pool. The swimming pool wall and bottom should be smooth and water-proof, light-colored, with rounded corners and bottom corners. The outside of the swimming pool shall be paved with non-slip and easy-to-wash materials. The walkway shall have a certain inclination to the outside and drainage facilities shall be provided. The drainage facilities shall be provided with water seals and other anti-air pollution isolation devices.

7. The passage of the shower room to the swimming pool shall be provided with a forced-pass immersion foot disinfection pool, the length of the pool shall not be less than 2 meters, the width shall be the same as the walkway, and the depth shall be 20 cm.

8. The indoor swimming pool should have personnel entrances and evacuation passages that meet the relevant national standards, and be equipped with mechanical ventilation facilities.

9. The swimming pool should be equipped with compliant swimming pool water treatment equipment and disinfection facility equipment, and the design parameters should be able to meet the requirements of water quality treatment. The liquid chlorine disinfection shall have leakage prevention measures. The water treatment machine room shall not directly communicate with the swimming pool, and an emergency alarm device shall be provided in the machine room. The area where liquid chlorine is placed and filled should be set on the leeward side of the swimming pool with warning signs, effective gas masks should be placed at the entrance of the dosing room, and the safety of the liquid chlorine should meet the requirements of relevant departments.

10. The swimming place should be equipped with residual chlorine, PH value, water thermometer and other water quality testing equipment.

More on Guangzhou Guangzhou Haisan Amusement Technology Co., Ltd-the No.1 in waterpark design, engineering, manufacturing, installation in China. Over 18 years later, we are the most trusted name in water park equipment industry in China, having developed over thousands projects in China and overseas, including 5 of the China’s top 10 water parks and many others in East European, Middle East, Southeast Asia, and so on.

Haisan is the top and most professional water park manufacturer in China which specializes in planning, design, manufacturing and installation of equipment, landscape gardening construction and operation (management) service for water park project. In Conghua and Shaoguan, , we have built two manufacture base with total 120,000sqm area and more than 500 staffs, which covers fiberglass water slide workshop, steel structure workshop and sculptures.

Haisan have one professional team with over 200 experts who specialize in theme park planning, engineering, landscaping, R&D for water park equipment, engineering construction. Some of them have over 20 years of industry experience. Haisan focus not only on beautiful design but also functionality and economic profitability.
Haisan is committed to providing the best-quality product and service by investing in continuous research and development. Haisan have specially established water park equipment research center which has got the strongest ability for design and research and more than 50 patents obtained. We are also a member of IAAPA and National Aquatic Entertainment Facility Standard Unit and 3 technical staffs from our company who set the GB/T18168-2008 standards (Specifications of water amusement equipment category). Haisan is the unique company in water park equipment filed, which is reported by CCTV - the most credibility media, as the brand enterprise of "Made In China".

For more information, contact at +0086-20-39218293 or info@gzhaisan.com. Please visit us at www.gzhaisan.com or www.hswaterslide.com  for product information, news, events and other updates.